WEDICO NEWS:

September 2016.

 

 

WEDICO Junior Super Cup 2016

Winner: Sven Müller  Club: FMT-Kurpfalz   Source: FMT-Kurpfalz

 

September 2016. 

 

WEDICO Junior Super Cup 2016

 

The WEDICO Junior Super Cup will take place at the 26. German Model-Truck-Championship in Hallbergmoos.

 

WEDICO is delighted to sponsor a red Freightliner CC with trailer and supports the 1.Modell-Truck-Team München E.V.through the supply of championship model-trucks and financial funds.

 

The event takes place on the 10. and 11. of September at the Hausler Hof.

 

April 2016. 

 

Video of the CAT D9T at the exhibition Sinshein. 

October 2015.

 

New pictures of Rapid Prototyping Model CAT D9T 

Source: WEDICO

September 2015.

 

WEDICO Junior Super Cup 2015

Winner: Justin Jäger – IGS-Siegerland, Source: IGS-Siegerland

Mannschaftsmeister 2015

1 MTT München, Source: IGS-Siegerland

September 2015. Customer Information


Please, find below the drawings for the single shank ripper # 3131. These are accessories for the Model CAT D9T.

 

We are going to deliver these accessories with all components, incl. two control valves and 4 hydraulic cylinders, at the same time as the basic kit CAT D9T  # 3130.

 

The total retail price for these accessories is EURO 2.090,00

 

Best regards, Your WEDICO – Team

 

3131-D9T- Einzahlaufreißer - single shan
Adobe Acrobat Dokument 56.5 KB
3131-D9T-Abmessungen Einzahnaufreißer -
Adobe Acrobat Dokument 93.4 KB

September 2015. WEDICO Junior Super Cup 2015

 

The 25. German Model-Truck Championship takes place in Wilnsdorf. Within this great establishment, WEDICO is proud to announce that its own event  (WEDICO Junior Super Cup) will be organized. Corresponding to the Silver-Anniversary, WEDICO will sponsor a silver polished Model, which consists of aluminium. In addition, WEDICO is delighted to support the event of “IGS Siegerland Sport und Modellbau e.V. Siegen“,by sponsoring and providing the payment of rent as well as the competition-model-vehicles.  

August 2015. Customer Information & Order Form: Kettendozer CAT D9T


4 Customer Information 23.07.15 engl..pd
Adobe Acrobat Dokument 8.1 KB
5 Order Form D9T englisch 30.07.15.pdf
Adobe Acrobat Dokument 7.4 KB
bon_de_commande_D9T.pdf
Adobe Acrobat Dokument 1.3 MB
Zeichnung 3D Modell 20.08.15 (2).jpg
JPG Bild 349.0 KB
Zeichnung 1 nit Abmessungen 20.08.15.jpg
JPG Bild 200.1 KB

November 2014. Wheel Loader CAT 966 G II

 

In recent months there have been some supply shortages with regard to the above-mentioned model. This was because some tooling and moulds needed to be reworked and others renewed. This process has now been completed and the series production has commenced.

We shall therefore be able to deliver this model from the middle to end of December 2014 in the design and quality you have become used to.

 

The quantity of models available in December 2014 is limited in view of the number of advanced orders that have already been placed. From February 2015, a delivery period of 8-10 days will once again be ensured.  

 

Thus, anyone still wishing to obtain a model in December should order directly or at least enquire as to our ability to supply. We shall then provide you with an immediate response.

 

October 2014. 24th German Model Truck Championship 2014

 

Congratulation all Champions and well placed competitor of the 24th German Model Truck Championship 2014, Leimen

 

WEDICO Junior Super Cup 2014

Source: Truck & Details

 

Champion: Dennis Pütz – FMT Rhein-Ruhr e.V.

 

TEAM Champion 2014

SourceTruck & Details

 

Champion: Reiner Schmelzer, Dirk Birlenbach and Georg Hirschauer

ISG Siegerland

May 2014. For the electric systems 782, 783, 784, 785 and 789 we are not able to get electronic components any longer.

 

So it is not possible to do repair on these systems.

March 2014. Tieflader-Anhänger / Low-Loader Trailer

Since the market for assembling models of construction machinery and municipal vehicles has developed enormously in recent years, the demand for a low-loader trailer has also increased. 

 

We had already offered such a construction kit in 2001, but at that time the market was not really ready for a model of that type. We have therefore decided to restart production of this kit for a limited period and to present it at the Fair:

“Faszination Modelltech” in Sinsheim from 21 to 23 March 2014.

 The model construction kits will be available in the following two colours:

 

# 23 Colour RAL 1007 “daffodil yellow”“

# 25 Colour RAL 2011 “deep orange” for municipal vehicles

 

The construction kit includes a tow bar # 422 that can be fitted onto the motor tractor. The trailer can be attached and removed with the aid of a servo and this greatly enhances enjoyment and results in many hours of fun.

 

January 2014. Kardanset for Radlader CAT 966. 

New:Available from stock!!

New: 743. Stainless steel spring set for low loader tyres and rims .We often have been asked for these parts. It contains springs 70mm and the axle has a width ot 144mm. All needed screws and small parts.

September 2013.. 23nd German Model Truck Championship 2013

Congratulation all champions and well placed competitor of the 23nd German Model Truck Championship 2013.
WEDICO Junior Super Cup 2013
Champion: Justin Erxleben .

June 2012. 22nd German Model Truck Championship 2012 

Congratulation all champions and well placed competitor of the 22nd German Model Truck Championship 2012.
WEDICO Junior Super Cup 2012
Champion: Paul Matthias jun.

Team Champion 2012
Champion: TMC 88 Berlin
Gilda Förster
Peter Pommeranz
Alexander Müller

September 2011. 21st German Model Truck Championship 2011
Congratulation all champions and well placed competitor of the 21st German Model Truck Championship 2011.
WEDICO Junior Super Cup 2011
Sieger: Fabian Schell

Team Champion 2011
Champion: IGS Siegerland e.V.
Reiner Schmelzer
Paul-Heinrich Schäfer
Florian Schäfer

February 2011. Tail gate for CAT 740

Beginning end of March 2011 we deliver following accessories: Conversion kit CAT 740 tail gate as a shears rear flap

Part No. 3111 Existing of:

tail gate, pillow blocks, side pieces as CNC aluminium milling parts , powder coated in CAT yellow and pin joints, ball bearings, screws and chains

September 2010. 20th German Model Truck Championship 2010

Congratulation all champions and well placed competitor of the 20th German Model Truck Championship 2010.

WEDICO Junior Super Cup 2010
Champion: Sebastian Gremmer:

Team Champion 2010
Champion: IGS Siegerland e.V.
Reiner Schmelzer
Paul-Heinrich Schäfer
Florian Schäfer

July 2010. WEDICO wins „TRUCK Model STAR 2010“ award

Readers of the Magazine “Truckmodell” have chosen th hydraulic excavator CAT 345 D LME from WEDICO as the “MODEL OF THE YEAR”.

The publishing house vth has awarded us with the prestigious“TRUCKMODELL STAR 2010”, on behalf of the readers of the magazine “TRUCKMODELL”. We would like to thank all the readers and customers who have voted to give us this award.

November 2009. From 1st November 2009 new address

Hünefeldstr. 74, 42285 Wuppertal

October 2009. 19th German Model Truck Championship 2009

Congratulation all champions and well placed competitor of the 19th German Model Truck Championship 2009.

WEDICO Junior Super Cup 2009 
Champion: Nils Holzapfel

Team Champion 2009
TMC 88 e.V. Berlin

On the occasion of the fair MODEL + HOBBY 2009 in Prague, a specialist jury chose our model MAN TGX “XXL-V8” as PRODUCT OF THE YEAR and awarded it 1st prize.

September 2009. 1st International Model Truck Meeting (Truckmodell Italia) Ischia September 11, to 13, 2009

Greetings of Mr. Rainer auf der Heide by Mr. Salvio Bausilio the supervisor of the meeting.

Hydraulic Bagger CAT 345 D LME

19th German Model Truck Championship 2009

The 2008 German Team Champion “MINI-TRUCK-CLUB Osnabrueck e.V.” organizes the 19th German Model Truck Championship on October 17th and 18th 2009.  

More information please click www.mtc-osnabrueck.com

As a sponsor WEDICO donates also in this year a truck model for the „Junior Supercup“.

 

The delivery of the competition trucks, with the new MAN TGX cabs, to the MTC, Osnabrueck, took on the exhibition INTERMODELLBAU, Dortmund 2009 in April.

Dump bodies „HP“ including hydraulic „HP“ and  chassis

Now we can deliver the model kits for the rigid truck from stock.
For semi-trailer we deliver the kits end of this month.

Aluminium long hole rims (40 mm diameter) for wide tyres with ball-bearing axle

We deliver these ball-bearing axles with long hole rims for semi trailer and full trailer from the beginning of October 2009. Part. no 528 – price € 82,00 each.

Discontinued Aluminium rims

We sold out part nos. # 508, # 509, # 510, # 511, # 512, # 522 and # 523, At the moment all rims can be delivering from stock.
In the future you can use rims # 524, # 525, # 526 und # 528.

February 2009. CAT 345 D – Hydraulic Excavator

WEDICO Project Study
Caterpillar Hydraulic Excavator Model 345 D

At the exhibition ‘Faszination Modellbau’ – from 12th to 15th March 2009 – we shall be presenting to the general public for the very first time the CAT 345 D Hydraulic Excavator as a rapid prototyping model.

New dumper also available as a trailer and individual assembly kit

The product lines that were already presented at the exhibition ‘Faszination Modellbau’ in Bremen 2008, the new assembly kits SCANIA CR19 and Peterbilt 359, will be extended

From April 2009 the new dumper will also be available as a semi trailer kit with a new chassis and new hydraulic system. The chassis will be supplied with trailing lift axles as a standard to enable an optimum ground contact for the wheels.

We can also supply from now on a dumper superstructure that fits to our driver cabs DAF XF105 SC, SCANIA Highline and Mercedes ACTROS for rigid trucks.

Should you not wish to order a complete model, the assembly kits e.g. chassis, dumper superstructure, hydraulics, etc. can be ordered individually.

Floating locking differentials now also available with independent axle

The floating WEDICO locking differentials are also available from now on with an additional floating axle system. This system has been especially adapted to fit the WEDICO differentials # 768 and # 769 and cannot, therefore, be supplied separately.

New electrical system “LC”

The electrical system “LC” provides you with the opportunity of not only activating the function for lights, blinkers and hazard lights but also, in addition, the option of triggering a hooter and a sound module. The BEC has a performance of max. 3A. The electrical system has a central PCB and a front and rear lighting board. This ensures simple fitting of the system. The light bulbs are connected directly to the lighting boards. All cable, plugs and bulbs required are supplied with the system. In addition, the electrical system has a speed controller that is geared to the WEDICO motors and is protected against overload and short circuit. The speed controller switches the reversing lights and can reduce to approx. 50 % speed with a jumper. The new electrical system “LC” is compatible with our complete assembly kits and in this area it will supersede our previous electrical systems for traction engines.

Available from the beginning of April under the Art.-No. 2100

The appropriate electrical system for the trailer or towed section is connected via two jack plugs on the traction engine and enables the functions for lights, brake lights, blinkers and hazard lights.

Available from the beginning of April under the Art.-No. 2101

Below, some remarks regarding existing products

Battery box with compressed air tank # 896

Originally developed for the new MAN TGX model and available in a chrome-plated design, can now be supplied for the same price in the colour black. However, it is also possible to fit this to all other models with a ‘Profi’ chassis and side panelling.

Blinker switch # 394

The blinker switch # 394 has been re-introduced into our product range. This will enable the bending light on the MAN TGX models to be switched on and off automatically.

 

November 2008. MAN TGX cabs „XLX“ and „XXL-V8“

The supply of the orders on hand will be effected in accordance with the receipt of such orders, and this at the end of November / beginning of December 2208 incl. the accessories ordered.

New dump truck with professional chassis 8 x 8

At the exhibition “Faszination Modellbau in Bremen / Germany from 21st till 23rd November 2008, we shall be presenting our Complete kits for Peterbilt 359 # 3150 and SCANIA CR19 # 3151 with a new dump body,new chassis 8 x 8 and a new 12bar (174psi) hydraulic system. The powder coating options for the cabs will be in the colours white, yellow, red and blue and for the dump bodies in the colours with, red and silver-grey.
The 4-axle chassis, based on a system used by the Finnish truck manufacturer SISU, is driven by the two full floating rear axles with locking differentials and is, therefore, very well suited for applications in difficult terrain. The front-most of the two steering axles can be subsequently equipped at any time with a locking differential.

The hydraulic system to lift and lower the dump body consists of a pump, tank, control valve block and cylinder and is driven with a 12-bar (174 psi) system. Exactly the same as is the case with our CAT models, the system is most convincing on account of its above-average performance.
These models will be available from February 2009. Part list see "Download".

September 2008. 18th German Model Truck Championship 2008

Congratulation all champions and well placed competitor of the 18th German Model Truck Championship.

Following some photos:

WEDICO Junior Super Cup 2008

Victory ceremony 1st to 3rd place – Champion: Nils Holzapfel

June 2008MAN “TGX V8”  -  powder coated: black

MAN “TGX XLX”  -  powder coated: white, yellow, red and blue

Delivery: App November 2008

May 2008. WEDICO Wheel loader CAT 966G II

Beginning with the vehicle number 507 we deliver all wheel loader kits with new cylinders for a quicker steering.

For customer with models from vehicle numbers 001 to 506 we offer following conversion kit:

Conversion kit steering cylinders CAT 966G II for quicker steering
Part.-No. 3107     Price: € 310,00

The conversion kit includes: Steering cylinders, retaining bushings, hose, T-pieces, nipple for the control valve block, oil filter and assembly instructions.

WEDICO Wheel loader CAT 966G II

Beginning with the vehicle number 507 we deliver all wheel loader kits with new cylinders for a quicker steering.

For customer with models from vehicle numbers 001 to 506 we offer following conversion kit:

Conversion kit steering cylinders CAT 966G II for quicker steering
Part.-No. 3107     Price: € 310,00

The conversion kit includes: Steering cylinders, retaining bushings, hose, T-pieces, nipple for the control valve block, oil filter and assembly instructions.

March 2008. WEDICO presents the feasibility study MAN TGX XLX and MAN TGX V8

“TRUCK OF THE YEAR 2008”

November 2007. DAF XF105 “SC” and “SSC”  -  TRUCK OF THE YEAR 2007”

Cab kits and accessories are now available from stock!

Mai 2007. WEDICO wins TRUCKMODELL STAR 2007 award

Readers of the magazine “Truckmodell” have chosen the Caterpillar CAT 740 Articulated Truck (Dumper) from WEDICO as the “model of the year”.

The publishing house vth has awarded us with the prestigious “TRUCKMODELL STAR 2007” award, on behalf of the readers of the magazine “Truckmodell”. We would like to thank all of the readers and customers who have voted to give us this award.

April 2007. Caterpillar CAT 740 – Articulated Truck (Dumper)

CAT 740 kit is now available from stock!

March 2007. WEDICO presents the feasibility study DAF XX105 “SC” and “SSC”
“TRUCK OF THE YEAR 2007”

First presentation of the feasibility study on the exhibition Faszination Modellbau, Sinsheim / Germany

September 2006. Locking metal differential for front- and rear axle

The successful operation of the metal differential, including lock system, gave us the inspiration, to extend the range of this system in the reduction ratio of 3:1 and 2:1. Differentials, part nos. 329 and 330 are not longer available.

 

May 2006. WEDICO wins the TRUCKMODELL STAR 2006 award

Readers of the magazine “Truckmodell” have chosen the SCANIA R-line from WEDICO as the “model of the year”. The publishing house vth has awarded us with the prestigious “TRUCKMODELL STAR 2006” award, on behalf of the readers of the magazine “Truckmodell”.

We would like to thank all of the readers and customers who have voted to give us this award.

November 2005. WEDICO presents the feasibility study CAT 740, Articulated Truck (Dumper)

First presentation of the feasibility study on the exhibition Faszination Modellbau, Friedrichshafen  / Germany.

SCANIA R- line  -  types “CR19”, “Highline” and “Topline”
“TRUCK OF THE YEAR 2005”

Cab kits and accessories are now available from stock!

March 2005. WEDICO presents the feasibility study SCANIA R- line - types 

“CR19”, “Highline” and “Topline” “TRUCK OF THE YEAR 2005”

First presentation of the feasibility study on the exhibition Faszination Modellbau, Sinsheim / Germany