Caterpillar 966G II – Wheel Loader at 1:14,5 scale

 



Illustration with Accessories

 

Complete Kit Art.-No. 3103 consisting of:

Chassis, front and rear vehicle unit, superstructures, differentials, steering and lifting cylinders.
Proportional control of the steering cylinders; hydraulic pump with filters, operated by a working
pressure of 174 psi. Three control valves, hose, T-pieces, lock bushings, hydraulic oil, electrical system, electric motor, battery pack 12V, 3-speed all-wheel gearbox, speed controller including
a sound module and loudspeaker. The axles are equipped with lockable, internal planetary gears
at reduction ratio of 15:1.

As common on all WEDICO models, this wheel loader model, too, has been manufactured from aluminium die-cast, aluminium metal sheets and high quality plastic components. Like the original wheel loader, all metal parts – including the hydraulic cylinders – will be supplied in yellow / black powder coat painting and a detailed assembly instruction. A special Caterpillar decoration sheet will make part of the kit package, too.

Technical data

Length: app. (612mm) 24.09", Width: app. (211mm) 8.31", Height: app. (250mm)9.84"
Track( tread): app. (158mm) 6.22"
Weight: app. 17.0 lb (7,7kg)

  • Finish: Epoxy powder coating
  • Soft rubber tyres “Goodyear” with reproduction of original tread pattern
  • Front and rear driving axle are made from metal, including partially lockable differentials.
    Reduction ratio 15:1
  • 3-speed gearbox from metal, reduction ratio 12:1 / 6:1 / 3:1
  • Pendulous rear axle
  • Rigid front axle fixed to the front carriage
  • Electronic system 12 Volts, battery pack, WEDICO-BUehlermotor, speed controller, engine sound, loud speaker, horn, head- and rear lights, brake lights
  • Hydraulic pump with motor, tank and filter, 174 psi (12 bar)
  • Control valve block
  • Hydraulics-Cylinder:
    for lifting and lowering of the boom
    for dumping and lifting of the bucket
    for steering to the right and left-hand side

     

 
 

 

2015.Touch up paint for Caterpillar models

2176.Battary pack NiMH 12V, 2.7mAh

3106.Conversion kit knuckle CAT 966G II

3107.Umrüstset Lenkzylinder CAT 966G II  

Caterpillar 740 – Articulated Truck (Dumper) at 1:14,5 scale

Complete Kit Art.-No. 3110 consisting of:

Chassis, front and rear vehicle unit, superstructures, differentials, steering and lifting cylinders.
Proportional control of the steering cylinders; hydraulic pump with filters, operated by a working
pressure of 174 psi. Two control valves, hose, T-pieces, lock bushings, hydraulic oil, electrical system, electric motor, battery pack 12V, 3-speed all-wheel gearbox, speed controller including
a sound module and loudspeaker. The axles are equipped with lockable, internal planetary gears
at reduction ratio of 15:1.

As common on all WEDICO models this dumper model, too, has been manufactured from aluminium die-cast, aluminium metal sheets and high quality plastic components. Like the original dumper, all metal parts – including the hydraulic cylinders – will be supplied in yellow / black powder coat painting and a detailed assembly instruction. A special Caterpillar decoration sheet will make part of the kit package, too.

Technical data

Length: app. (750mm) 29.53”, Width: app. (236mm) 9.29”, Height: app. (258mm) 10.16”, 
Track(tread): app. (185mm) 7.28”, 
Weight: app. 23.6 lb (10,7kg)

  • Finish: Epoxy powder coating
  • Soft rubber tyres “Goodyear” with reproduction of original tread pattern
  • Front and rear driving axle made from metal, including partially lockable differentials. Reduction ratio 15:1
     
  • 3-speed gearbox from metal, reduction ratio 12:1 / 6:1 / 3:1
  • Pendulous rear axle
     
  • Rigid front axle fixed to the front carriage
  • Electronic system 12V, battery pack, WEDICO-Buehlermotor, speed controller, engine sound, loud speaker, horn, head- and rear lights, blinkers, brake lights
     
  • Hydraulic pump with motor, tank and filter, 174 psi (12 bar)
  • Control valve block
  • Hydraulics-Cylinder
    2 for dumping and lifting of the dump-body
    2 for steering to the right and left-hand side

2015.Touch up paint for Caterpillar models

2176.Battary pack NiMH 12V, 2.7mAh

3111.Tail gate for CAT 740, powder coated

Caterpillar 345 D LME Hydraulic Excavator, scale 1 : 14.5

 

 

Complete assembly kit: Art.-No. 3120 consisting of:

Upper and lower vehicle sections, chain drive with toothed belts and 2 electric gear motors, lower section in classic H-shape, driver’s cab and superstructures, boom-, stick- and bucket cylinders, hydraulic pump with filter and 203 psi (14 bar) operating pressure, three way control valve block, hydraulic hoses, T-pieces, lock bushings, hydraulic oil, electronics with light and sound system, loudspeaker, battery pack 12V 4.5Ah and speed controller. The model distinguishes itself with its very high wrenching and breaking-away force capabilities. A 7-channel remote control unit is required to enable excellent handling.

As was the case with the models CAT 966G II and CAT 740, this model is also manufactures out of die-cast aluminium, aluminium sheet and high-quality plastic materials. All metal parts, including the hydraulic cylinder, are powder coated in the colours yellow/black, just like the original – a feature that is quite uncommon other assembly kits available on the market. A decorative sheet is included in the scope of deliverables.

Technical data

Length: app. 800 mm (31.50”) Track (tread): app.240mm (9.45”)
Heigth: app. 220 mm (8.66”)
Weight: app.14.0 kg (30.9 lb)

  • Finish: Epoxy powder coating
  • Chain: Made from zinc die-cast, black anodize
  • Chain and sprocket wheel drive, toothed belts and 2 electric gear motors
  • Electronic system 12 Volts, battery pack, speed controller, loud speaker, engine sound, horn and LED lights
  • Drive system: forward/backwards, right/left, turning on the place right/left
  • Upper vehicle section: endlessly turning right and left
  • 3 way control valve block
  • Hydraulic cylinders for boom, stick and bucket
 
 

2015.Touch up paint for Caterpillar models

3121.Battary pack NiMH 12V, 4.5Ah