| Art. No.: |
Description |
|
| 111 |
Axle carriers for semi-trailer, 2 axle, for standard chassis |
 |
| 112 |
Axle carriers for semi-trailer, 3 axle, for standard chassis |
 |
| 131 |
Bumper, polished aluminium with round rear lamps - yellow and red |
 |
| 145 |
Rims - 2 pieces, chromed, rim diameter app. (40mm) 1.57''
fitting tyres part.-nr. 448 and 748 |
 |
| 146 |
Standard fifthwheel for semi-trailer |
 |
| 163 |
Servo installation kit for operating servo |
 |
| 374 |
Axle carriers for trailers with 2 axles, standard chassis |
 |
| 376 |
Triple fenders for rear axles on triaxial semi trailers, polished aluminium,
For the attachment to professional frames "NF" additionally you will need the kit part no. 2004 |
 |
| 377 |
same like before but made from aluminium checker plate |
 |
| 378 |
Double fenders for prime movers, trailers and semi-trailers except 366. polished aluminium,For the attachment for professional frames "NF" additionally you will need the kit part no. 2004 |
 |
| 379 |
same like before but made from aluminium checker plate |
|
| 380 |
Mud guards, 2 pieces, aluminium checker plate, incl polyamide supports, for attachmend either before or behind the wheels, fitting all vehicles, except 366 |
 |
| 381 |
Mud flaps fitting part no. 376-380 |
 |
| 422 |
Trailer coupling, black |
 |
| 423 |
Trailer drawbar with turntable
prepare for standard springs |
 |
| 424 |
Doule landing gear fitting all semi trailer, with remote-contollable releasing |
 |
| 444 |
Mud flaps, 2 pieces, for 4-chamber rear lights |
 |
| 445 |
4-chamber rear lights, without bumper |
 |
| 446 |
4-chamber rear lights, incl. bumper, polished aluminium |
 |
| 448 |
Standard tyres "Fulda-Ecocontrol"
wheel diameter (73mm) 2.77'', section width (20mm) 0.79'', fitting rim diameter (40mm) 1.57'' |
 |
| 453 |
Wide tyres "Fulda-Multitonn 2"
wheel diameter (73mm) 2.87'', section width (25mm) 0.98'', fitting rim diameter (40mm) 1.57'' |
 |
| 454 |
Rear rims for wide tyres ,2 pieces, chromed, rim diameter app. (40mm) 1.57''
fitting tyres part no. 453 |
 |
| 456 |
Front rims for wide tyres ,2 pieces, chromed, rim diameter app. (40mm) 1.57''
fitting tyres part no. 453 |
 |
| 489 |
Tank, round, polished aluminium, incl. 2 tank straps fitting all prime movers except Peterbilt with sleeper. (83mm) 3.27" long, diameter (45mm ) 1.77" |
 |
| 490 |
Tank round, polished aluminum, incl. 2 tank straps for Peterbilt with sleeper, (105mm) 4.13" long, diameter (45mm) 1.77" |
 |
| 508 |
Aluminium rim set "ALCOA" for front axle equipped with wide tyres,
rim diameter (40mm) 1.57", fitting tyres part no. 453 |
 |
| 509 |
Aluminium rim set "ALCOA" for rear axle equipped with wide tyres
rim diameter (40mm) 1.57", fitting tyres part no. 453 |
 |
| 510 |
Aluminium rim set "ALCOA" for standard tyres part no. 448
for front axle on prime movers, and for front and rear axles on low-loader units, incl. two double-sealed ball bearings. Also fitting the steerable tandem front axle part no. 110, rim diameter (40mm) 1.57" |
 |
| 511 |
Aluminium rim set "ALCOA" for drive axle tyres part no. 748 or 448
equipped with non-driven rear axle with twin tyres, incl. each two double-sealed ball bearings and suiting aluminium axle, rim diameter (40mm) 1.57" |
 |
| 512 |
Aluminium rim set "ALCOA" for drive axle tyres part no. 748
equipped with driven rear axles with twin tyres, suitable for differentials part nos. 117, 753, 754, 768 and 769, rim diameter (40mm) 1.57" |
 |
| 522 |
Aluminium rim set "ALCOA" for standard tyres part no. 448,
driven front axle, rim diameter (40mm) 1.57" |
 |
| 523 |
Aluminium rim set "ALCOA" for wide tyres part no. 453,
driven front axle for Century class S/T cab, rim diameter (40mm) 1.57" |
 |
| 524 |
Aluminium long hole rim set for wide tyres part no. 453, driven front axle, rim diameter (40mm) 1.57" |
 |
| 525 |
Aluminium long hole rim set for wide tyres part no. 453, non-driven front axle, rim diameter (40mm) 1.57" |
 |
| 526 |
Aluminium long hole rim set for rear tyres part no. 748,
driven and non-driven rear axle equipped with twin tyres. Rim diameter 40 mm |
 |
| 527 |
Aluminium nut lock for long hole for rims part nos. 524 and 525 |
 |
| 528 |
Aluminium long hole rim set for wide tyres, rim diameter (40mm) 1.57’’, axle with ball bearings for semi-trailer and full trailer
|
 |
| 700 |
Aluminium fifthwheel "Rockinger" for semi trailer
with remote-contollable releasing |
 |
| 701 |
Aluminium front axle |
 |
| 702 |
Set of springs "NF" for professional chassis |
 |
| 703 |
Cabel brackets for professional chassis |
 |
| 704 |
Square tank, high polished, (82x45x38,5 mm) 3.23x1.77x1.52" |
 |
| 720 |
Mud guards, 2 pieces, polished aluminium, fitting professional chassis |
 |
| 721 |
Retrofit set for the attachment of superstructures to professional chassis.
This set is needed when using either chassis 733 or 735 |
 |
| 722 |
Servo installation kit 1 for steering servo on C.O.E. trucks
for steering and operation servo on Conventional truck and Peterbilt units, fitting all professional chassis |
 |
| 723 |
Servo installation kit 2 for operating servo on C.O.E. trucks using gearbox 165
fitting all professional chassis |
 |
| 745 |
rim, chromed, 2 pieces, for low loaders and tyres part no. 746
rim diameter (29mm) 1.14" |
 |
| 746 |
Low loaders tyres "Fulda-Multitonn 2 245/70, 2 pieces,
wheel diameter (51mm) 2.01", width(15mm) 0.59", for rim diameter of (29mm) 1.14" |
 |
| 747 |
rim, grey, 2 pieces, for low loaders and tyres part no. 746
rim diameter (29mm) 1.14" |
 |
| 748 |
Drive axle tyres "Fulda-Eceforce 315/80, 2 pieces,
wheel diameter (73mm) 2.77" , width (20mm) 0.79", for rim diameter of (40mm) 1.57" |
 |
| 755 |
Fender for single rear axle |
 |
| 756 |
Fender for tandem rear axle |
 |
| 2016 |
Widening of truck track for 2 rear axle |
 |
| 2017 |
Cardan joint (U-point) # 1 - steel with zinc plated surface, hardened,
pair to connect gearbox # 765 and locking differential 3:1 and 2:1, using drive shaft # 152 or all trucks or Conventional trucks to connect gearbox # 765 and locking differential FRONT axle using 3:1 and 2:1, using drive shaft # 152
C.O.E. front axle |
 |
| 2018 |
Cardan joint (U-point) # 2 - see before but to connect both rear axle locking differentials with and without output, 3:1 and 2:1 |
 |
| 2019 |
Cardan joint (U-point) # 3 - see before but for C.O.E. to connect gearbox # 765 and locking differentials FRONT axle 3:1 and 2:1 |
 |
