|
|
Prime movers |
The WEDICO superstructures can be used with all types of cabs to transform the prime movers into many different variants of trucks. The method of system construction allows the composition of a wagon and drag. It does not matter whether you are using a 2-axle or 3-axle trailer chassis, the bodies will fit both. Construction of all variants is possible, and does not depend upon the type of chassis of your prime mover.
Both, standard or professional may be used, although in order to fit a body to a professional chassis you will need to use a retrofit set.
The only exception is the crane body which needs the chassis # 736, fitted with a fifth wheel # 700.
WEDICO construct these superstructures in the same way as all other products, using high quality materials only, like aluminium sheets or aluminium frames and high strength plastic components.
The coloured bodies are powder painted. You will be finding more detailed below.
|
| Art.No. |
Description |
|
| 273 |
Van body, white, app. (409x163x179mm) 16.10x6.42x7.05''
for rigid truck and 2-axle trailer |
 |
| 284 |
Tank body, oval, white, app. (376x160x146mm) 14.80x6.30x5.70''
for rigid truck and 2-axle trailer |
 |
| 285 |
Tank body, oval, polished, app. (376x160x146mm) 14.80x6.30x5.70''
for rigid truck and 2-axle trailer |
|
| 309 |
Flatbed body fits prime movers and 2-axle trailers
Prepared for the attachment of 12 stakes. Catching pigots are provided for the attachment of a shipping container part. No. 308 - 380x175x115mm) 14.96x6.89x4.53'' |
 |
| 308 |
Shipping container for flatbed-bodies
incl. catching pigots. Panels made from corrugated aluminium. 2 tail doors (365x160x160mm) 14.35x6.30x6.30'' |
 |
| 290 |
Dump body, white, for rigid truck, app. (452x160x142mm) 17.70''x6.30''x5.59''
Fits prime movers. With embossed outer side panels, tail gate with lever locking device. Prepared for the installation of the radio-controlled hydraulics and the electronic speed controllers. |
 |
| 291 |
same like before, colour red |
|
| 292 |
same like before, colour silver |
|
| 2110 |
Dump body „HP“, white, powder coated in
combination with Peterbilt 359
and chassis # 735 or # 2125.
Additional needed hydraulic „HP“ for rigid trucks and
semi-trailer # 2130
|
|
| 2110 |
like before, colour red |
|
| 2122 |
like before, colour siler |
|
| 2115 |
Dump body „HP“, white, powder coated
in combination with c.o.e. cabs
and chassis # 733 or # 2126.
Additional needed hydraulic „HP“ for rigid trucks and
semi-trailer # 2130
|
 |
| 2116 |
like before, colour red |
|
| 2117 |
like before, colour silver |
|
| 2130 |
Hydraulic „HP“, 12 bar, for rigid trucks and semi-trailer
The hydraulics will fit the chassis # 733, # 735, # 2125
or # 2126
|
 |
| 276 |
Crane body "US style", red, app. (355x173x185mm) 13.90x6.81x7.28'', crane arm length 225 to 365 mm (8.85 to 14.37’’), incl. winch. Accessories: Electronic speed controller part-no. 295 and 2 x all-round warning lamps part-no. 793. Only for chassis part no. 736 |
 |
| 294 |
Hydraulic fitting all dump bodies
Radio-controllable via electronic speed controller part no. 295
Cylindre diameter (10, 12, 14 and 16mm) 0.39, 0.47, 0.55 and 0.63" , length (139 mm) 5.47", lift 295mm
lifting power 6kp, pump pressure 6 bar, pump measurements: (30x35x72,5mm) 1.18x1.38x2.85"
pump motor 12V 0,2-1,5A,
oil tank: (50x70x20/30mm) 1.97x2.76x0.79/1.18" , 80ml |
 |
| 295 |
Electronic speed controller
for the radio-controlled operating of dump hydraulic and of the crane unit. 12V, max. 2A load current, shortresistent. |
 |
| 296 |
Hydraulic oil, 100ml, for hydraulic No. 294 |
 |
| 403 |
Tank inner compartment
with fitting plug-in parts for tank bodies. Filling and discharge hoses, equipment tool box with drain cock. Capacity 0.5l. Up to 4 of these compartments will fit the tanker semi trailer, and 2 fit the full trailer |
 |
| 404 |
Manhole covers black, 4 pieces
Hole distance (20mm) 0.79", charging hole diameter (20mm) 0.79" |
 |
|
| |
|
